模具(集成电路)
泥浆
模具
材料科学
造型(装饰)
金属注射成型
复合材料
冶金
流量(数学)
烧结
气流
机械工程
工程类
纳米技术
几何学
数学
作者
Yasuhiro Maeda,Yasuo Yamada,Takashi Hanai,Hiroyuki Nomura
标识
DOI:10.2320/jinstmet1952.65.4_266
摘要
In order to obtain sound green compacts, which are necessary for producing quality sintered products by metal injection molding (MIM), it is important to control the filling behavior of the slurry in the mold cavity. Pressurized air, which exists near the final filled-up area, exerts a large effect on both the flow dynamics of the slurry and the properties of the green compact. A permeable die has a lot of microscopic pore channels in the mold cavity. Use of a permeable die is a useful technique to enhance the slurry flowability. In this study, the flow behavior and the properties of green and sintered compacts of stainless steel were investigated in several injection experiments using both ordinary and permeable dies. A numerical simulation was also conducted. The results showed that the molding speed and the quality of the green and sintered compacts are better when the permeable die is employed rather than the ordinary die. Furthermore, the backpressure of the air and the volume of the exhausted air were calculated by the FAN method combined with backpressure analysis. The results of these analyses will serve as useful information for designing compacts of uniform quality with no defects.
科研通智能强力驱动
Strongly Powered by AbleSci AI