钎焊
微观结构
材料科学
复合材料
钛合金
陶瓷
锡
复合数
扫描电子显微镜
抗剪强度(土壤)
透射电子显微镜
钛
合金
冶金
纳米技术
环境科学
土壤科学
土壤水分
作者
Yixuan Zhao,Caiwang Tan,Shengpeng Hu,Jian Cao,Jicai Feng
出处
期刊:Vacuum
[Elsevier]
日期:2017-08-01
卷期号:142: 58-65
被引量:31
标识
DOI:10.1016/j.vacuum.2017.05.005
摘要
A novel nano-Si3N4 particle reinforced AgCuTi composite filler (AgCuTiC) was used to braze Ti6Al4V and Si3N4 ceramic in the study and brazing cycles that peak at 880 °C for 0–20 min. Effects of holding time on interfacial microstructure and mechanical property were studied by scanning electron microscopy, energy dispersive spectrometer, transmission electron microscopy, and universal testing machine. TiN and Ti5Si3 were identified as the main product of the reaction between Si3N4 and Ti. The interfacial microstructure evolved considerably with joining time, eventually leading to a high degree of inhomogeneity across the length of the joint, and the maximal shear strength of 78.3 MPa was obtained when the joint was brazed at 880 °C for 10 min. A limited number of Si3N4/Si3N4 and Ti6Al4V/Ti6Al4V joints using AgCuTiC with different content of Ti particles were also studied to clarify the influences of diffusion and dissolution behaviors of element Ti on interfacial microstructure. In terms of characterizing the interfacial phases, efforts were made to understand the microstructural evolution mechanism of Si3N4/Ti6Al4V brazed joints.
科研通智能强力驱动
Strongly Powered by AbleSci AI