催化作用
碳氢化合物
共沉淀
沸石
介孔材料
产量(工程)
化学工程
费托法
选择性
氧合物
化学
水煤气变换反应
材料科学
氧化铁
无机化学
有机化学
冶金
工程类
作者
Elena Corrao,Fabio Salomone,Emanuele Giglio,Micaela Castellino,Silvia Maria Ronchetti,Marco Armandi,Raffaele Pirone,Samir Bensaid
标识
DOI:10.1016/j.cherd.2023.07.052
摘要
To effectively address the challenges posed by global warming, a prompt and coordinated effort is necessary to conduct an extensive study aimed at reducing CO2 emissions and overcoming the obstacles presented by expensive and scarce fossil fuel resources. This study primarily focuses on comparing two different methodologies for preparing Na-promoted Fe3O4-based catalysts for the CO2 hydrogenation into hydrocarbon mixtures. Three catalysts were synthesized and tested: two samples were impregnated with a different amount of Na (1 wt.% and 5 wt.%), while a third one was obtained via coprecipitation with NaOH. As the latter catalyst exhibited the best performance, it was combined with zeolites in two ways: physical mixtures and core-shell structures. MFI-type zeolites were used in both configurations and a conventional structure was compared to a hierarchical one. As a result, mesopores increased successfully both the CO2 conversion from 37% to 40% and the liquid hydrocarbon (C6+) selectivity from 29% to 57%, doubling the C6+ yield. On the other hand, NH3-TPD and XPS measurements demonstrated that the intimate contact between the two materials in the core-shell structures led to the migration of Na from the oxide to the zeolite reducing the concentration of strong acid sites and, consequently, the liquid hydrocarbon yield.
科研通智能强力驱动
Strongly Powered by AbleSci AI