Review: Structural, elastic, and thermodynamic properties of cubic and hexagonal ScxAl1−xN crystals

A review of the structural, elastic, and thermodynamic properties of cubic and hexagonal ScxAl1−xN crystals over the range of possible random alloys is provided. Based on measured and simulated lattice and internal cell parameters of NaCl (B1), CsCl (B2), and α-ZnS (B3) type cubic ScxAl1−xN lattices as well as of β-ZnS (B4), lh-MgO (Bk), and NiAs (B81) type hexagonal ScxAl1−xN crystals, their atomic positions, distances to nearest neighbor atoms, geometric dimensions of crystal cells, mass density, as well as their average bond length and bond angles are presented in dependence on the alloy composition. The understanding gained about the crystal lattices is used to provide a model for the transitions from the β-ZnS to the lh-MgO or NaCl lattice induced by the alloying of AlN with ScN. Based on published data sets of stiffness coefficients, the compliance coefficients, Young's modulus, shear modulus, Poisson's ratio, compressibility, and the sound velocities are presented in relation to the orientation of representative crystal planes and axes for rock salt, layered hexagonal, and wurtzite ScxAl1−xN crystals. Particular attention is paid to the directional anisotropies of elastic properties of the different crystal lattices if Sc atoms substitute an increasing number of Al atoms. Based on sound velocities determined, an overview of the fundamental thermodynamic properties of cubic and hexagonal ScxAl1−xN alloys is provided, such as the Debye temperature, heat capacity, minimum heat conduction, and melting temperature.