材料科学
碳纳米管
热的
热传导
气凝胶
热导率
传热
调节器
大气温度范围
热透过率
热阻
热力学
复合材料
化学
物理
生物化学
基因
作者
Wei Yu,Wenhua Dai,Zixin Hong,Guoxian Li,Ziying Wang,Chuizhou Meng,Jiaping Wang,Changhong Liu,Shijie Guo,Shoushan Fan
标识
DOI:10.1002/adfm.202314021
摘要
Abstract Efficient heat transfer control is highly demanded for dynamic thermal management of equipment and buildings especially when the environmental temperature dramatically changes. Thermal switches, the current approach of heat transfer control, suffer from the issues of low switching ratios below eight and sharp state transition between “on” and “off”. Herein, a continuously‐tuned thermal regulator with an ultrahigh thermal‐conductivity change ratio of 43 based on superaligned carbon nanotube aerogel is reported, which works on the regulation of both thermal interfacial resistance and conduction pathways by compressive deformation‐induced microstructure evolution. This thermal regulator can stabilize the device temperature at 25 °C when the environmental temperature varies by 7 and 11 °C under the natural convection and forced convection conditions, respectively. Toward practical application, the thermal regulator with flexibility is wrapped around a cylindrical lithium‐ion battery to control the operation temperature within the optimal range of 20–40 °C for enhanced discharging performance even at an environmental temperature of −20 °C. Besides, by combining the thermal regulator with radiative cooling film, the house model temperature can be lowered by 2.7 °C during daytime and raised by 1.1 °C during nighttime compared with the bare one. This efficient thermal regulation approach offers an effective solution for practical thermal management.
科研通智能强力驱动
Strongly Powered by AbleSci AI