光束传播法
波导管
光子学
光学
逐渐变细
高斯光束
激光器
硅光子学
光电子学
物理
材料科学
电子工程
计算机科学
梁(结构)
工程类
折射率
计算机图形学(图像)
作者
Netanel Katash,Salman Khateeb,Dror Malka
出处
期刊:Micromachines
[Multidisciplinary Digital Publishing Institute]
日期:2022-10-06
卷期号:13 (10): 1680-1680
被引量:28
摘要
Transceivers that function under a high-speed rate (over 200 Gb/s) need to have more optical power ability to overcome the power losses which is a reason for using a larger RF line connected to a Mach–Zehnder modulator for obtaining high data bitrate communication. One option to solve this problem is to use a complex laser with a power of over 100 milliwatts. However, this option can be complicated for a photonic chip circuit due to the high cost and nonlinear effects, which can increase the system noise. Therefore, we propose a better solution to increase the power level using a 4 × 1 power combiner which is based on multimode interference (MMI) using a silicon nitride (Si3N4) slot waveguide structure. The combiner was solved using the full-vectorial beam propagation method (FV-BPM), and the key parameters were analyzed using Matlab script codes. Results show that the combiner can function well over the O-band spectrum with high combiner efficiency of at least 98.2% after a short light coupling propagation of 28.78 μm. This new study shows how it is possible to obtain a transverse electric mode solution for four Gaussian coherent sources using Si3N4 slot waveguide technology. Furthermore, the back reflection (BR) was solved using a finite difference time-domain method, and the result shows a low BR of 40.15 dB. This new technology can be utilized for combining multiple coherent sources that work with a photonic chip at the O-band range.
科研通智能强力驱动
Strongly Powered by AbleSci AI