Effect of Aging Treatment on the Microstructure and Properties of 2.2 GPa Tungsten-Containing Maraging Steel

Maraging steel is a prominent category of ultrahigh-strength steel (UHSS) characterized by excellent comprehensive properties, and it finds wide applications in manufacturing load-bearing structural components. In this study, a novel tungsten-containing maraging steel, C-250W, was designed. The effects of aging treatments on the mechanical properties, microstructure, precipitations, and reverted austenite of C-250W steel were investigated. The results revealed that the optimal combination of strength and toughness could be achieved through an aging treatment of C-250W steel carried out for 5 h at 480 °C after solution treatment at 1000 °C for 1 h. As the aging temperature increased, the proportion of dimples in the impact fracture gradually decreased while that of quasi-cleavage increased, leading to a reduction in Charpy impact energy. The boundary of martensitic lath decomposed gradually as the aging temperature increased, and it disappeared entirely at temperatures higher than 550 °C. Moreover, the aging process resulted in the formation of phases, including spherical Fe2M (M represents Mo, W) and thin strip-shaped Ni3N (N represents Mo, Ti) precipitates. These precipitates coarsened from 5 nm to 50–200 nm with increasing aging temperature. Additionally, the content of reverted austenite increased with the aging temperature. Within the temperature range of 400 °C to 500 °C for aging treatment, the content of film-shaped reverted austenite was approximately 3%, primarily distributed at the boundary of martensite lath. When the aging temperature exceeded 550 °C, the content of reverted austenite reached 20.2%, and its morphology changed from film-shaped to block-shaped, resulting in a decline in strength and toughness.