Investigation of Li-In alloy application as anode for all-solid-state batteries

Abstract The problem of the interface optimization between solid electrolyte and anode must be resolved for all-solid-state power sources creation. In the presented work, it is proposed to use Li-In alloy as anode material instead of metallic lithium. The wettability of the composite solid electrolyte based on Li 7 La 3 Zr 2 O 12 by In and Li-In alloy was investigated by high-temperature optical dilatometry. The symmetric cells with metallic lithium and Li-In alloy were assembled and their resistance was measured at room temperature. It was established that Li-In alloy application leads to a significant decrease in the resistance at the interface between anode and solid electrolyte (from 37.2 to 0.5 kΩ cm 2 ). So, it can be concluded that using of Li-In alloy leads to the interface optimization between anode and composite electrolyte based on cubic Li 7 La 3 Zr 2 O 12 and can be applied for all-solid-state power sources creation.