材料科学
量子点
光电子学
聚合物
光致发光
能量转换效率
X射线光电子能谱
纳米技术
饱和电流
饱和(图论)
量子效率
原子层沉积
量子隧道
沉积(地质)
太阳能电池
胶体
真空沉积
钝化
光谱学
量子点太阳电池
载流子
薄膜
图层(电子)
接口(物质)
聚合物溶液
电压
聚合物太阳能电池
制作
作者
Hao Li,Xiaochen Guo,Yinglin Wang,Z Q Wang,Yanlong Lu,Xintong Zhang,Yichun Liu
标识
DOI:10.1021/acsami.5c23347
摘要
Modulation of the back-contact interface in PbS colloidal quantum dot solar cells (CQDSCs) is critical for regulating carrier transport and extraction, thereby profoundly influencing the overall device performance. Conventionally, the back-contact interface is built up by vacuum deposition of Au on the p-type PbS CQD layer; however, high-energy Au atoms may penetrate into the PbS CQD layer, causing the deterioration of the back-contact interface. To address the issue, we herein propose a polymer interfacial layer - enabled back-contact engineering strategy. The insertion of insulating poly(methyl methacrylate) (PMMA) into the Au/PbS interface increases the charge extraction efficiency from 70 to 85% and reduces the reverse saturation current by ca. 2 orders of magnitude, to 1.3 × 10 –5 mA cm –2, resulting in an improved power conversion efficiency of 12.2%. X-ray photoelectron and photoluminescence spectroscopy verify that the polymer layer effectively blocks Au atom penetration. Replacing PMMA with hole transport polymers, such as PTAA and PM7, as well as PCBM with electron-transport property, also improves device performance; however, the enhancement is less pronounced than that achieved with the insulating PMMA. These observations suggest that Au penetration-induced interface deterioration is a non-negligible factor influencing the quality of the Au/PbS back-contact interface. The insulating PMMA interlayer also improves the device stability, offering a convenient, low-temperature approach for the back-contact interface engineering of CQD optoelectronic devices.
科研通智能强力驱动
Strongly Powered by AbleSci AI