结构光
点云
天线(收音机)
校准
投影机
计量系统
计算机视觉
计算机科学
点(几何)
光学
均方误差
曲面(拓扑)
观测误差
曲面重建
人工智能
准确度和精密度
均方根
天线测量
数学
激光器
对象(语法)
投影(关系代数)
激光跟踪器
轮廓仪
全球定位系统
天线高度注意事项
结构光三维扫描仪
算法
迭代重建
迭代法
辐射模式
作者
Wenjuan Xue,Yan Ping Yuan,Baohua Liu,Youxie Hong
标识
DOI:10.1109/mcai66356.2025.11381976
摘要
This paper takes the on-orbit solid-state antenna with a diameter of 2.5m as the research object and adopts the multi-camera structured light target-free measurement method to design a antenna type surface accuracy measurement system composed of three sets of binocular vision measurement sub-units and six sets of laser projectors. According to the layout scheme of the measurement unit, theoretical calculations show that the measurement accuracy of the system can reach 0.0325mm. The global calibration results of the camera and the laser projector in the system are presented in the paper. By combining manual coarse registration and the Iterative Closest Point algorithm, the point cloud data of the entire field are registered and aligned, achieving high-precision three-dimensional reconstruction of the antenna surface. Taking the root mean square error of distance as the evaluation index of surface accuracy, the experimental results show that the proposed measurement system can efficiently complete the collection and splicing of point cloud data. The root mean square error (RMS) of the antenna type surface profile obtained through actual measurement is 0.044mm, which meets the predetermined accuracy requirements.
科研通智能强力驱动
Strongly Powered by AbleSci AI