材料科学
制作
石英
光电子学
皮秒
参数统计
激光器
熔融石英
光学
信号处理
激光束
作者
Salah ud Din,Jusam Byeon,Hafiz Muhammad Ashraf,Mujeeb Ur Rehman,Yeon‐Wha Oh,Jung‐Ryul Lee
标识
DOI:10.1016/j.optlastec.2026.116355
摘要
Through-glass vias (TGVs) enable vertical interconnections in 3D integrated circuits, MEMS packaging, and optoelectronic assemblies, but achieving consistent via quality across different glass types remains a fabrication challenge. This work investigates how pulse duration, focal position, and beam polarization affect TGV geometry in two compositionally distinct substrates: synthetic quartz and D263 alkali-containing silicate float glass. A quasi-Bessel beam delivered picosecond pulses at durations of 7 ps and 10 ps, while the focal position was stepped across six Z-axis offsets ranging from + 0.3 mm to − 0.2 mm. After laser modification, all samples were wet-etched in 10% hydrofluoric acid (HF). For D263 glass only, beam polarization was additionally varied from linear to circular using a quarter-wave plate (QWP), allowing its influence on via depth, sidewall morphology, and taper angle to be evaluated. The two materials showed markedly different responses under identical processing conditions. Quartz responded more favorably to 10 ps pulses, producing deeper and more uniform vias with lower taper angles, whereas D263 performed better at 7 ps. For D263 at 7 ps, switching to circular polarization increased etch depth at negative focus offsets by roughly 16 to 18% and reduced taper angles, while the effect was negligible at 10 ps. This polarization comparison was carried out for D263 only. In both materials, positive Z-offsets consistently yielded deeper penetration. These results offer practical parameter guidance for glass-composition-specific TGV fabrication in high-throughput interconnect manufacturing.
科研通智能强力驱动
Strongly Powered by AbleSci AI