空气动力学
涡轮机
航空航天工程
海洋工程
环境科学
工程类
空气动力
涡轮叶片
燃气轮机
机械
叶尖间隙
结构工程
计算机科学
机械工程
汽车工程
材料科学
地质学
作者
Yajie Xue,Z ZHANG,Xiaodong Zhang,Shanyou Wang,Chen Li,Qingzong Xu,Qiang-qiang Du
标识
DOI:10.1016/j.ast.2026.113321
摘要
Variable-geometry turbines achieve flow matching over a wide operating range by adjusting the guide-vane stagger angle. However, the endwall clearance and pivot-shaft structure introduced by vane rotation can significantly affect aerodynamic performance. In this study, a two-stage variable-geometry turbine with spherical endwalls is investigated using steady numerical simulations based on ANSYS CFX and the SST turbulence model. The effects of guide-vane rotation angle, endwall clearance height, and pivot-shaft location on the flow characteristics and aerodynamic performance are systematically analyzed. The results show that endwall clearance height and guide-vane rotation angle are the dominant factors affecting aerodynamic performance. As the clearance height and vane closing angle increase, both the total pressure recovery coefficient of the adjustable guide vane and the total-to-total efficiency of the two-stage turbine decrease. The outlet mass flow rate is mainly controlled by the guide-vane rotation angle. The pivot-shaft location also modulates the loss characteristics, especially under large closing-angle and clearance conditions, where the trailing-edge pivot configuration produces the most severe loss. Flow-field analysis indicates that low total-pressure recovery and high entropy increase are mainly observed near the hub and tip endwall regions and in the downstream wake region. A response surface model further reveals the nonlinear coupling effects among clearance height, rotation angle, and pivot-shaft location. These findings provide guidance for endwall optimization and multi-parameter matching design of spherical-endwall variable-geometry turbines.
科研通智能强力驱动
Strongly Powered by AbleSci AI