A cement slurry capable of in-situ forming permeable isolating zones is developed for controlling water intake capacity of high permeable zones,improving injectivity profile and preventing wells from sand production with geologic features of Huqing oil reservoirs,Zhongyuan,taken into consideration.A basic recept of the cement slurry is worked out: grade G cement+buffering chemical(BC) of bivalent metal ions in mass ratio 1∶1 as base material+15—25% pore retaining material+3—8% pore connecting material+3—5% stabilizer;water to(cement+BC) ratio 1.67—1.00.Introducing stabilizer reduces the fluid separation down to 2—0%.With constituent use levels varrying within the basic recept of the slurry,the cement set at 85℃ and 20 MPa in 48hrs has water phase permeability,Kw,in rang 0.022—0.080 μm2 and compression strength, S,in range 5.1—9.5 MPa;the S of set cement increases and the Kw—keeps unchanged when the setting temperature raises from 70℃ to 150℃.The initial set time of the slurry decreases with increasing water to(cement+BC) ratio and at 85℃—increases with dosage of retarder,being of 310—460 min at retarder dosage 0.5%.The plugging technology with the permeable cement has been successfully used in 3 water injection wells in Huqing.The geologic characteristics and the connectivity of injection well H19-12 and 2 production wells,the cement slurry squeezing technology,and the improvements in water injectivity profile and the oil output raise in the production wells are described in some detail.