In the preparation of asymmetric sulfonated polyether sulfone (SPES) membranes, the sulfonation of polyether sulfone (PES) was carried out by both a surface sulfonation method and a polymer sulfonation method. The resulting membranes, as well as ordinary PES membranes, were tested for the separation of 50% carbon dioxide and 50% methane gases mixtures, and their ion exchange capacities were also determined. Permeabilities and separation factors were determined for both types of membranes as function of solvent evaporation times varying from 2 to 6 minutes, casting temperatures varying from 60 to 100 °C, and in the case of polymer sulfonated membranes, permeabilities and separation factors were also determined as function of polymer concentrations varying from 15 to 25 wt%. Permeabilities obtained with surface-sulfonated membranes were not significantly higher than those observed for PES membranes, but the permeabilities for polymer-sulfonated membranes were significantly higher. Separation factors obtained with surface-sulfonated membranes were lower than those of PES membranes, and those of the polymer-sulfonated membranes were significantly higher. Ion exchange capacities obtained with surface-sulfonated membranes were not significantly higher than those of the PES membranes, but those of the polymer-sulfonated membranes were significantly higher.