氯化亚砜
材料科学
炭黑
碳纳米管
电化学
化学工程
阴极
电极
碳纤维
乙炔
锂(药物)
氯化物
复合材料
化学
有机化学
复合数
医学
天然橡胶
物理化学
工程类
冶金
内分泌学
作者
Hee-Youb Song,Moon-Hyung Jung,Soon‐Ki Jeong
标识
DOI:10.33961/jecst.2020.01179
摘要
Lithium thionyl chloride (Li/SOCl2) batteries exhibit the highest energy densities seen in commercially available primary batteries because of their high operating voltages and discharge capacities. They are widely used in various extreme environments; however, they show signs of degradation at high discharge currents. The discharge performance of Li/SOCl2 is considered to be greatly dependent on the carbon materials used in the cathode. Therefore, suitable carbon materials must be chosen to improve discharge performances. In this work, we investigated the discharge properties of Li/SOCl2 batteries in which the cathodes contained various ratios of acetylene black (AB) and multi-walled carbon nanotubes (MWCNTs) at high discharge currents. It was confirmed that the MWCNTs were effectively dispersed in the mixed AB/MWCNT cathodes. Moreover, the discharge capacity and operating voltage improved at high discharge currents in these mixed cathodes when compared with pure AB cathodes. It was found that the mesopores present in the cathodes have a strong impact on the discharge capacity, while the macropores present on the cathode surface influence the discharge properties at high discharge rates in Li/SOCl2 batteries. These results indicate that the ratio of mesopores and macropores in the cathode is key to improving the discharge performance of Li/SOCl2 batteries, as is the dispersion of the MWCNTs. Keywords: Lithium Thionyl Chloride, Multi-Wall Carbon Nanotube, Acetylene Black, Lithium Primary Batteries
科研通智能强力驱动
Strongly Powered by AbleSci AI