Accuracy improvement of single-sample calibration laser-induced breakdown spectroscopy with self-absorption correction

The single sample calibration laser-induced breakdown spectroscopy (SSC-LIBS) is quite suitable for the fields where the standard sample is hard to obtain, including space exploration, geology, archaeology, and jewelry identification. But in practice, the self-absorption effect of plasma destroys the linear relationship of spectral intensity and element concentration based on the Lomakin-Scherbe formula which is the guarantee of the high accuracy of the SSC-LIBS. Thus, the self-absorption effect limits the quantitative accuracy of SSC-LIBS greatly. In this work, an improved SSC-LIBS with self-absorption correction (SSC-LIBS with SAC) is proposed for the promotion of quantitative accuracy of SSC-LIBS. The SSC-LIBS with SAC can correct the intensity ratio of spectral lines in the calculation of SSC-LIBS through relative self-absorption coefficient K without complicated preparatory information. The alloy samples and pressed ore samples were used to verify the effect of the SSC-LIBS with SAC. Compared with SSC-LIBS, for alloy samples, the average RMSEP and average ARE of SSC-LIBS with SAC decreased from 0.83 wt.% and 13.75% to 0.40 wt.% and 4.06%, respectively. For the pressed ore samples, the average RMSEP and average ARE of SSC-LIBS with SAC decreased from 4.77 wt.% and 90.48% to 2.34 wt.% and 14.60%. The experimental result indicates that SSC-LIBS with SAC has a great improvement of quantitative accuracy and better universality compared with traditional SSC-LIBS, which is a mighty promotion of the wide application of SSC-LIBS.