Toward All-Ceramic Solid State Lithium Battery: Hot-Pressing Nasicon Electrolyte
作者
Andrea Paolella,Sylvio Savoie,Gabriel Girard,Abdelbast Guerfi,Karim Zaghib
出处
期刊:Meeting abstracts [Institute of Physics] 日期:2020-11-23卷期号:MA2020-02 (5): 1010-1010
标识
DOI:10.1149/ma2020-0251010mtgabs
摘要
In this presentation we show the influence of pressure during the hot sintering stage on the ionic conductivity of the lithium super ionic conductor Li1.5Al0.5Ge1.5(PO4)3 (LAGP) as electrolyte for solid state lithium battery 1. A new method is developed to obtain high ionic conductivities at only 650 °C by applying pressure (56 MPa) instead of standard 850-900°C. Considering the possible decomposition reactions when cathode materials are annealed at high temperature (typically ≥700 °C), the use of high pressure at 650 °C can significantly limit the formation of side-products. In this presentation we show the criteria required to optimize the pressure and temperature parameters for enhancing the total ionic conductivity. Finally, this study reports an all solid-state battery based on a LiFePO4 olivine cathode prepared at 650 °C showing very good Li-intercalation/deintercalation performance. Good ionic interfacial contact is achieved without using polymer and liquid electrolyte at the positive electrode. 1 Paolella et al. Advanced Materials Interfaces, 2020, Just Accepted Manuscript DOI: 10.1002/admi.202000164 Figure 1