材料科学
热电效应
塞贝克系数
热电材料
声子散射
声子
散射
电阻率和电导率
大气温度范围
凝聚态物理
合金
光电子学
能量转换效率
热导率
价(化学)
热力学
冶金
光学
复合材料
电气工程
物理
工程类
量子力学
作者
Ruiheng Li,Fujie Zhang,Wenxin Ou,Xiaobo Tan,Jianglong Zhu,Ding Ren,Ran Ang
标识
DOI:10.1021/acsami.3c13907
摘要
SnTe-In 2 Te 3 alloys ensure excellent electrical properties in the whole temperature region due to the resonant level. Nevertheless, temperature-sensitive resonance states and single phonon scattering restrict further improvement of thermoelectric performance. Consequently, it is anticipated that additional electrically independent scattering sources should be introduced to impede phonon transport. Here, the SnTe-In 2 Te 3 –GeMnTe 2 alloy is prepared by further solidifying cubic GeMnTe 2, which demonstrates multiple modulation effects. The highly redissolved Mn 2+ promotes the valence band convergence, enhances the Seebeck coefficient at higher temperature, and balances the possible weakened resonance level effect at higher carrier concentrations, and a high average power factor (1.94 mW m –1 K –2 ) is realized over the entire temperature range. Additionally, compensatory vacancies, substitutions, and Ge/Mn precipitates are easily constructed with GeMnTe 2 alloying, leading to a further reduction in lattice thermal conductivity, which reaches κ l ∼ 0.6 W m –1 K –1 at 850 K. Ultimately, a high peak zT of ∼1.25 (850 K) and a zT ave of 0.72 (300–850 K) are realized in (SnTe) 2.91 (In 2 Te 3 ) 0.03 (Ge 0.5 Mn 0.5 Te) 1.2, and the maximum thermoelectric conversion efficiency of ∼2.8% (Δ T ∼ 450 K) is achieved. The present results indicate multiple effects of GeMnTe 2 in enhancing the thermoelectric performance of SnTe-In 2 Te 3 alloys.
科研通智能强力驱动
Strongly Powered by AbleSci AI