A comparative study of flake graphite iron and compacted graphite iron in austempered condition for directional control valves

Demand for lighter materials with the right qualities is unavoidable in the present era of engineering. Compacted graphite iron is a type of cast iron gaining momentum nowadays in foundries due to its distinct characteristics that fall between gray cast iron/flake graphite iron and spheroidal graphite iron. It becomes the right candidate to replace flake graphite iron in many applications. In this research, flake graphite iron (FC −30) and compacted graphite iron-300 grades were studied to enhance its properties through austempering heat treatment process. Initially, the as-cast (non-austempered) flake graphite iron and compacted graphite iron were subjected to microstructural study and mechanical testing. Subsequently, the flake graphite iron and compacted graphite iron were subjected to austempering heat treatment. The various austempering temperatures selected are 270, 320, and 370 °C for different soaking time periods of 30, 60, 90, and 120 min. As cast flake graphite iron specimen (FC-30) exhibited lesser tensile strength (293 N/mm 2 ) than as cast compacted graphite iron (528 N/mm 2 ) and austempered compacted graphite iron (652 N/mm 2 ). With respect to hardness measurement, austempered compacted graphite iron specimens yielded higher hardness of up to 415 BHN. However, the compacted graphite iron specimen austempered at 370 °C for 90 min measured an optimum hardness value of 373 BHN and tensile strength of 630 N/mm 2 with less retained austenite (0.3%). This hardness value is considered to be more suitable in machining operation for making hydraulic directional control valves exposed to constant abrasion.