预制混凝土
复合数
厚板
材料科学
接口(物质)
结构工程
比例(比率)
满标度
复合材料
工程类
物理
量子力学
毛细管数
毛细管作用
作者
Jindong Yang,Yanping Zhu,Junfeng Qiu,Yang Zhang,Jie Zhang,Minghong Qiu,Husam H. Hussein
标识
DOI:10.1061/jbenf2.beeng-7013
摘要
To enhance cracking resistance and long-term durability of bridge superstructure subjected to flooding and seawater environment in the coastal area, ultrahigh-performance concrete (UHPC) is applied to the tensile side of a full-scale normal concrete (NC) hollow slab; to accelerate bridge construction, the UHPC is prefabricated as a formwork before casting NC. When prefabricating the UHPC layer, an interface treatment combination technique is performed, including creating grooves, anchoring rebars, and fixing stirrups. This study aims to confirm the effectiveness of the proposed interface treatment combination technique in a full-scale UHPC-NC hollow composite slab. The failure mode, load–deflection response, load–strain of concrete and reinforcement, load–crack width, and interface slip are discussed. Additionally, the theoretical models for self-restrained UHPC shrinkage stress due to inside reinforcements and more stresses due to NC shrinkage are established, respectively. The results show that the proposed interface technique successfully guarantees the composite working behavior with an interface slip of 0.072 mm at the failure. The NC crack (appearing first), UHPC crack, and reinforcement yielding govern the entire slab flexural response. The UHPC layer is within the strain-hardening stage with effective crack control ability until the composite slab fails. The added shrinkage stresses in the UHPC and NC layers interpret their flexural cracking stress reductions, which provides a new angle into the property mismatch between the full-scale test and material property test.
科研通智能强力驱动
Strongly Powered by AbleSci AI