Numerical simulation is an effective tool for improving the large diameter single silicon crystal quality and reducing the preparation cost.The deflection of melt/crystal interface in Czochralski(Cz) method is a key issue for crystal quality.Owing to the high-temperature environment and in-situ observation are quite difficult,the finite element analysis was applied to research the interface shape and melt flow during the crystal growth.Using the thermal field and control parameters in this paper,we concluded that the maximum deflection of interface shape and Von Mises stress increases as the crystal length increasing and that crystal/melt interface shape and melt flow are sensitive to the pulling rate and the rotation rate of crystal and crucible.Interface with low deflection can be achieved for low pulling rate or for certain combination of crystal and crucible rotation rates.