Al2O3 (13%TiO2)coating and NiCr-Cr3C2 coating on 42CrMo steel substrate were prepared by plasma spraying. The microstructure, morphology and phase composition were analyzed by OM, XRD and SEM. And then the microhardness and thermal shock properties of the coatings were measured. The results show that the coatings are typical layer structure, which have mechanical bonding with the substrate. The main phases of Al2O3 coating is γ-Al2O3 as well as α- Al2O3. The main phase of NiCr-Cr3C2 coatings is Cr23C6, Cr7C3, Cr3C2, Cr2O3. The average microhardness of the Al2O3 coating and NiCr-Cr3C2 coating is 557.7HV and 586.4HV, respectively. The micro-cracks present in the NiCr-Cr3C2 coating after 25 times thermal shock tests and present in the Al2O3 coating after 18 times.