材料科学
机械
有限元法
机械工程
水冷
工作(物理)
复合材料
核工程
传热
功率(物理)
作者
Ziwei Zhang,Lihua Cai,Haoye Wang,Pengwei Zeng,Haifeng Fang
标识
DOI:10.1016/j.ijthermalsci.2026.111326
摘要
Localized heat accumulation, non-uniform temperature distribution, and the trade-off between thermal performance and hydraulic penalty remain major challenges in large-capacity lithium iron phosphate (LiFePO 4 ) battery modules. This study proposes a liquid cooling plate integrating dendritic hierarchical flow channels with honeycomb-inspired hexagonal fins for an eight-cell 280 Ah prismatic LiFePO 4 module. A three-dimensional transient fluid–solid conjugate heat transfer model was established and experimentally validated, with maximum relative deviations below 3% for temperature and 4.79% for pressure drop. Comparative analyses identified the hexagonal-fin structure with the SIDO arrangement as the preferred configuration, followed by investigation of the nonlinear effects of porosity, fin arrangement, fin spacing, and Reynolds number on maximum temperature, maximum temperature difference, and pressure drop. A Kriging surrogate model based on 60 LHS–CFD samples was validated using five-fold cross-validation and 12 independent CFD points. Multiple NSGA-II runs and TOPSIS weight sensitivity analysis were then employed to identify the Pareto compromise region, followed by high-fidelity CFD screening. The recommended design ( φ = 0.405, S = 5.48 mm, Re = 308) achieved Tmax = 34.336 °C, ΔTmax = 4.671 °C, and ΔP = 255.22 Pa. Compared with the baseline, T max and ΔT max decreased by 0.699 °C and 0.441 °C, respectively, while ΔP increased from 143.29 to 255.22 Pa. Off-design simulations confirmed a stable thermal advantage across the investigated operating conditions. The results reveal a synergistic interaction between macroscopic flow redistribution and periodic regeneration of local thermal boundary layers, providing guidance for thermal–hydraulic trade-off design of large-capacity LiFePO 4 liquid cooling systems.
科研通智能强力驱动
Strongly Powered by AbleSci AI