共晶体系
二苯甲烷
联苯
催化作用
氢
重量分析
材料科学
氢气储存
化学工程
化学
有机化学
无机化学
工程类
合金
作者
Da Han,Young Suk Jo,Byeong Soo Shin,Munjeong Jang,Jeong Won Kang,Jiyou Han,Suk Woo Nam,Chang Won Yoon
标识
DOI:10.1002/ente.201700694
摘要
Abstract A novel, liquid‐phase hydrogen storage material was produced by mixing biphenyl (C 12 H 10 , solid) and diphenylmethane (C 13 H 12 , liquid) with a mass ratio (wt %) of 35:65. The eutectic mixture was proved to be liquid at ambient temperature with a viscosity of 3.0 cP at 25 °C and a vapor pressure of 1.4 Pa at 25 °C, which potentially meets the requirements for an efficient hydrogen storage system. A theoretical study using COSMO‐RS method further confirms that an optimum composition of biphenyl and diphenylmethane for the formation of eutectic mixture is 37:63 by mass, which is very close to the composition found experimentally. The eutectic mixture exhibited a superior activity for hydrogenation reactions conducted at 120 °C under 50 bar of H 2 pressure in the presence of a Ru (5 wt %)/Al 2 O 3 catalyst. Hydrogen uptake of the eutectic mixture tested was close to full conversion, which corresponds to 6.9 wt % and 60.1 g L −1 of gravimetric and volumetric hydrogen storage capacities, respectively.
科研通智能强力驱动
Strongly Powered by AbleSci AI