复合材料
剪切(地质)
有限元法
GSM演进的增强数据速率
剪应力
极限抗拉强度
断裂力学
作者
Quan Sun,Daqian Zan,Jian Jun Chen,Hongliang Pan
标识
DOI:10.1016/j.tafmec.2015.06.003
摘要
Abstract Edge cracks are commonly observed in steel strip in cold rolling, which may cause deterioration of quality and productivity of products. The edge defect is one of the important factors that lead to edge cracks in cold rolling. In this paper, the GTN damage model coupled with shear damage mechanism proposed by Nahshon and Hutchinson (2008) was employed to analyze the ductile damage and failure behavior of steel sheet with edge defects under multi-pass cold rolling. Cold rolling experiments of silicon steel with edge notches were performed on an experimental rolling mill to verify the accuracy of the numerical results. The simulation results show that two cracks appeared in the notch tip after five passes rolling and extended toward the direction with an angle around 45° and 135° to the rolling direction, which was in good agreement with the experimental data. The influences of notch shape and size on the onset of cracks around the notch tip are investigated and some significant conclusions are drawn.
科研通智能强力驱动
Strongly Powered by AbleSci AI