结垢
化学
膜
化学工程
腐植酸
扫描电子显微镜
多糖
色谱法
傅里叶变换红外光谱
材料科学
有机化学
生物化学
工程类
复合材料
肥料
作者
Shu Wang,Kang Xiao,Xia Huang
标识
DOI:10.1016/j.seppur.2018.09.062
摘要
• RO fouling behavior of real coal industrial wastewater was analyzed in detail. • Roles of hydrophobic/philic organics and inorganics (Ca/Mg/Si) were identified. • HON and HIN had the highest fouling potential per unit concentration. • Polysaccharide was responsible for rapid initial fouling and low steady-state flux. • Si further limited the steady-state flux by altering foulant layer structure. In this study, various fouling characteristics on the surface of a commercial reverse osmosis (RO) membrane were identified, in terms of different organic and inorganic components. Specifically, a practical secondary wastewater of coal chemical industry was used as the feed solution, and was fractionated into six hydrophobic/hydrophilic acid/base/neutral portions. RO membrane fouling behaviors at different stages were critically described using two characteristic parameters, i.e., initial flux decline rate and final steady-state flux. These parameters were quantified using Michaelis-Menten relation as a model fitting method. In general, the hydrophilic neutral (HIN) and hydrophobic neutral (HON) fractions had the fastest initial fouling rate and the lowest steady-state flux, mainly due to their high contents of polysaccharide. Among the organic constituents (polysaccharide/protein/humic acid), polysaccharide was the most responsible for rapid initial flux decline and low final steady-state flux, as proved by Kendall’s correlation. Among the inorganic constituents (Ca/Mg/Si), Si was found to exert the greatest influence on the final steady-state flux. This indicates that polysaccharide and Si played a combined role in determining the foulant layer permeability at the prolonged fouling stage, and a possible mechanism is that Si might alter the structure of polysaccharide gel layer. Further information on the fouling layers was systematically provided by means of Fourier transform infrared spectroscopy, confocal laser scanning microscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy with fractal dimension analysis.
科研通智能强力驱动
Strongly Powered by AbleSci AI