离子液体
化学
四氟硼酸盐
双酚A
电化学
检出限
重复性
电化学气体传感器
石墨烯
再现性
选择性
扫描电子显微镜
玻璃碳
分析化学(期刊)
电极
化学工程
纳米技术
色谱法
循环伏安法
材料科学
复合材料
有机化学
物理化学
环氧树脂
催化作用
工程类
作者
Preeyanut Butmee,Gamolwan Tumcharern,Pranorm Saejueng,Dalibor M. Stanković,Astrid Ortner,Juthamas Jitcharoen,Kurt Kalcher,Anchalee Samphao
标识
DOI:10.1016/j.jelechem.2018.12.014
摘要
A simple electrochemical sensor for bisphenol A (BPA) was developed based on a composite of graphene nanoplatelets (GNPs) and 1-butyl-2, 3-dimethylimidazolium tetrafluoroborate (ionic liquid, IL) as a modifier for glassy carbon paste electrodes (GCPEs). Scanning electron (SEM) and atomic force microscopy (AFM) were employed to characterize the morphology and surface modification. The electrochemical behavior of BPA on IL-GNP/GCPEs was investigated and the results showed that IL-GNP composites enhance the electrochemical signal toward BPA due to the synergetic effect of GNPs and IL. The experimental parameters including the amount of IL and GNPs, pH of solution, pulse potential, step potential, and scan rate were optimized. Under optimal conditions, the proposed sensor exhibited a linear relationship between signal and BPA concentrations ranging from 0.02–5.0 μM, with detection and quantification limits of 6.4 nM and 0.02 μM respectively. Moreover, the electrochemical sensor showed good repeatability (RSD = 3.3%, n = 5 measurements), good reproducibility (RSD = 3.8%, n = 5 sensors), high accuracy of 95.3–104.5% recovery, acceptable selectivity, and stability. The sensor was successfully applied to the determination of BPA in water samples in contact with plastic materials. The results were satisfactory and in agreement with reference values from a standard HPLC method.
科研通智能强力驱动
Strongly Powered by AbleSci AI