Co‑MOF-Derived Flake-Like Co3O4 Supported Pd Nanoparticles as High-Performance Hydrogen Peroxide Electroreduction Catalysts

Development of highly efficient catalysts for the hydrogen peroxide reduction reaction (HPRR) has been a focus of research for fuel cells using hydrogen peroxide (H 2 O 2 ) as an alternative cathode oxidant. The carbon-doped flake-like cobalt oxide electrode (Co 3 O 4 @C NF) was prepared on nickel foam (NF) by annealing the metal organic framework (MOF). A Co 3 O 4 @C/Pd NF (CPNF) electrode was derived from Co 3 O 4 @C NF by supporting Pd nanoparticles. Half-cell tests demonstrated that the CPNF electrode exhibited outstanding catalytic performance. The CPNF electrode displayed a high current density of 932 mA cm −2 at −0.8 V (vs Ag/AgCl). This aligns with its low activation energy (7392.8 J mol −1 ). The electron transfer numbers for the Co 3 O 4 @C NF and CPNF electrodes were 2.97 and 3.32, respectively. Incorporating CPNF as the cathode of Direct borohydride-hydrogen peroxide fuel cell (DBHPFC) yielded notable catalytic performance, with a peak power density of 68 mW cm −2 . The CPNF electrode exhibited remarkable stability, sustaining continuous current discharge for over 20 h. These electrochemical properties result from the structural characteristics obtained through MOF annealing, which increases the number of exposed active sites and enhances ion transport. Therefore, CPNF stands as a promising cathode catalyst for DBHPFC.