Influence of stabilization heat treatment temperature on microstructure and stress rupture properties of Inconel 706 superalloy

Although the stabilizing heat treatment between solution treatment and aging treatment in Inconel 706 alloy is important to improve its stress rupture life, the influence of stabilization heat treatment temperature on the microstructure and stress rupture properties has not been well understood. In this study, heat treatments consisting of three stabilization temperatures (800 °C, 845 °C, and 880 °C) were performed in Inconel 706 alloy. The results showed that the stress rupture properties were improved with the increase of stabilization temperature. When compared with stabilization at 800 °C, the alloy stabilized at 880 °C exhibited a 96% increase in stress rupture life and a 110% increase in elongation. Furthermore, increasing the stabilization temperature led to the increased amount of η phase at grain boundaries. The η phase appeared in granular, rod-shaped or needle-shaped morphology. The microstructure in the grain interior exhibited compact γ'/γ'' coprecipitates in the samples stabilized at 800 °C and 845 °C, while that showed noncompact γ'/γ'' coprecipitates in the sample stabilized at 880 °C. The formation of 2.34 vol% η phase was found to be beneficial for the stress rupture properties. The improvement in stress rupture properties was ascribed to the presence of η phase and the associated precipitate-free zones at grain boundaries.