压阻效应
材料科学
标度系数
聚乳酸
复合材料
渗流阈值
纳米复合材料
碳纳米管
制作
热塑性塑料
聚碳酸酯
电阻率和电导率
聚合物
电气工程
病理
替代医学
工程类
医学
作者
Razieh Hashemi Sanatgar,Aurélie Cayla,Jinping Guan,Guoqiang Chen,Vincent Adriaan Nierstrasz,Christine Campagne
出处
期刊:Polymers
[Multidisciplinary Digital Publishing Institute]
日期:2022-07-22
卷期号:14 (15): 2981-2981
被引量:19
标识
DOI:10.3390/polym14152981
摘要
An increasing interest is focused on the application of 3D printing for sensor manufacturing. Using 3D printing technology offers a new approach to the fabrication of sensors that are both geometrically and functionally complex. This work presents the analysis of the 3D-printed thermoplastic nanocomposites compress under the applied force. The response for the corresponding resistance changes versus applied load is obtained to evaluate the effectiveness of the printed layer as a pressure/force sensor. Multi-walled carbon nanotubes (MWNT) and high-structured carbon black (Ketjenblack) (KB) in the polylactic acid (PLA) matrix were extruded to develop 3D-printable filaments. The electrical and piezoresistive behaviors of the created 3D-printed layers were investigated. The percolation threshold of MWNT and KB 3D-printed layers are 1 wt.% and 4 wt.%, respectively. The PLA/1 wt.% MWNT 3D-printed layers with 1 mm thickness exhibit a negative pressure coefficient (NPC) characterized by a decrease of about one decade in resistance with increasing compressive loadings up to 18 N with a maximum strain up to about 16%. In the cyclic mode with a 1 N/min force rate, the PLA/1 wt.% MWNT 3D-printed layers showed good performance with the piezoresistive coefficient or gauge factor (G) of 7.6 obtained with the amplitude of the piezoresistive response (Ar) of about -0.8. KB composites could not show stable piezoresistive responses in a cyclic mode. However, under high force rate compression, the PLA/4 wt.% KB 3D-printed layers led to responses of large sensitivity (Ar = −0.90) and were exempt from noise with a high value of G = 47.6 in the first cycle, which is a highly efficient piezoresistive behavior.
科研通智能强力驱动
Strongly Powered by AbleSci AI