A Novel Phase Calibration Method for Airborne P-, L-, and S-Band SAR Tomography Based on Weighted Phase Gradient Autofocus

Airborne Synthetic Aperture Radar (SAR) Tomography (TomoSAR) technology facilitates the extraction of three-dimensional (3D) information of target scatterers. However, phase screens induced by radar platform trajectory errors causes TomoSAR defocusing, which adversely affects the accuracy of the forest vertical structure retrieval. Additionally, the phase screens exhibit space-variant characteristics, which significantly degrade the calibration performance estimated by traditional phase gradient autofocus (PGA). This paper proposes an improved phase calibration method synthesizing unconstrained optimization model and weighted PGA (WPGA), which effectively address the above challenges. Firstly, the SAR data stack is segmented into multiple subareas by assuming that phase screens are space-invariant within each small area, which reduces complexity and improves computational efficiency. Secondly, a WPGA method synthesizing the scatterer heights derived from an unconstrained optimization model is proposed to estimate the phase screens. Simulation experiments are conducted to validate the effectiveness of the proposed phase calibration method. Furthermore, the full-polarization SAR data stacks acquired by the BorTomoSAR campaign are used for tomographic focusing analysis. Experimental results demonstrate that the proposed method accurately estimates the phase screens at the P, L, and S bands, providing a efficient solution for the forest vertical structure retrieval.