循环伏安法
对苯二酚
介电谱
检出限
核化学
生物炭
材料科学
吸附
微分脉冲伏安法
磷酸
分析化学(期刊)
电化学
化学
电极
热解
色谱法
有机化学
物理化学
冶金
作者
Qian Chen,Jianrong Jiang,Jialiang Lin,Xinyu Wang,Kai Chen,Xiaoyan Huang,Jianzi Huang,Chaogang Wang,Zhangli Hu,Hong Yuan Xu
摘要
ABSTRACT Four biochars were prepared from lychee shell with or without phosphoric acid activation under one‐ or two‐stage heating, and characterized by scanning electron microscopy, transmission electron microscopy, infrared spectroscopy and Raman spectroscopy, respectively. Their adsorption capacities were evaluated by methylene blue adsorption test. Their electrochemical properties were depicted by electrochemical impedance spectroscopy and cyclic voltammetry. The biochar prepared by two‐stage heating and phosphoric acid activation (LSC‐THP) exhibited a high porosity, the best adsorption capacity, lowest electric resistance and largest electrochemically active surface, was applied to modify a glassy carbon electrode (GCE) after mixed with chitosan (CS), to fabricate the sensing electrode LSC‐THP/CS/GCE for the simultaneous detection of catechol (CC) and hydroquinone (HQ). Square wave voltammetry and differential pulse voltammetry measurements indicated that LSC‐THP/CS/GCE exhibited the best response current signal at pH 6.6, with the linear detection range of 10–2000 μmol·L−1 and limit of detections of 1.23 and 0.44 μmol·L−1 for CC and HQ detections, respectively. LSC‐THP/CS/GCE also exhibited a good anti‐interference ability and could be applied to the simultaneous detection of CC and HQ in real samples. This study provides a promising approach to improve the electrochemical performance of biochars for the development of novel electrochemical sensors.
科研通智能强力驱动
Strongly Powered by AbleSci AI