生物陶瓷
材料科学
多孔性
陶瓷
抗压强度
3D打印
脚手架
生物医学工程
复合材料
组织工程
骨组织
化学工程
医学
工程类
作者
Cristina-Ioana Dobriţa,Alina Ioana Bădănoiu,Georgeta Voicu,Adrian Ionuț Nicoară,Simina-Maria Dumitru,Maria-Eliza Puscasu,Ștefania Chiriac,Rǎzvan Ene,Florin Iordache
标识
DOI:10.1016/j.ceramint.2023.08.270
摘要
Porous bioceramic scaffolds were obtained by the 3D printing technique starting from a mixture of hydroxypropyl methyl cellulose and a powder obtained by sol-gel method which contains merwinite, monticellite, pseudowolastonie and periclase.The scaffolds were thermally treated at 1370 °C for 3 h and the main mineralogical compound assessed by XRD was akermanite. The obtained scaffolds have adequate mechanical and biological properties thus a great potential for applications in hard tissue engineering. The positive results obtained for this type of scaffolds are due to the precision of 3D printing technique, i.e. ability to control shape and size of both scaffolds and pores, as well as the high reproducibility. The porous bioactive ceramic scaffolds have adequate compressive strength (up to 3.5 MPa) and exhibit mineralization capacity and potential in stimulating cell adhesion and proliferation as well as bacteriostatic properties.
科研通智能强力驱动
Strongly Powered by AbleSci AI