钙钛矿(结构)
材料科学
氧化物
电极
熵(时间箭头)
复合材料
化学工程
冶金
热力学
化学
工程类
物理化学
物理
作者
Muhammad Salman,Sumaiya Saleem,Yihan Ling,Majid Khan
标识
DOI:10.1021/acsaem.4c01614
摘要
The development of symmetrical solid oxide fuel cells (SSOFCs) has been restricted by the challenge of finding electrode materials that are both highly active and stable. Sr segregation on the surface of perovskite oxides can also significantly affect the durability and oxygen reduction activity of the SSOFC electrodes. In this study, the concept of high-entropy electrodes is proposed, and a high-entropy perovskite oxide La 0.2 Pr 0.2 Eu 0.2 Ce 0.2 Sr 0.2 FeO 3−δ (HEP-LSF) was fabricated and examined as a favorable electrode material for SSOFCs. The catalytic activity and electrochemical performance were significantly improved by partial substitution of Eu, Pr, and Ce into the A-site, whereas the formation of a disorderly stress field around Sr suppressed Sr-segregation during long-term operation. The HEP-LSF cathode attained a remarkably low polarization resistance of 0.136 Ω·cm 2 in yttria-stabilized zirconia (YSZ) at 800 °C, which is almost half (0.265 Ω·cm 2 ) of a conventional La 0.2 Sr 0.8 FeO 3−δ (LSF) cathode under the same conditions. The YSZ-based SSOFC with HEP-LSF electrodes exhibited a power density of 451 mW/cm 2 at 800 °C. More importantly, the SSOFC with HEP-LSF electrodes exhibited good stability at 700 °C for 100 h. Moreover, the electrical conductivity and activation energy for HEP-LSF is higher than LSF which is 18.67 kJ·mol –1, and 599.57 S·cm –1 at 800 °C. These results demonstrate that HEP-LSF suppresses Sr segregation and has outstanding potential as an electrode material for SSOFC, thus making it a promising candidate for practical applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI