Effect of POE on mechanical properties and cellular structure of PP/Nano-CaCO3 composites in IMD/MIM process

Abstract Nano-CaCO 3 can effectively improve the strength of foamed Polypropylene (PP), ethylene-octene copolymer (POE) can greatly enhance the toughness of PP, and PP-g-MAH can improve the compatibility of Nano-CaCO 3 with PP. The supercritical fluid-nitrogen (N 2 ) was used as physical foaming agent, and the PET film was selected to study the effect of POE content on the mechanical properties and cellular structure of PP/nano-CaCO 3 blends during combined in-mold decoration and microcellular injection molding (IMD/MIM) process. The results showed that the addition of POE did improve the impact strength of PP/nano-CaCO 3 composites, while the tensile strength and flexural strength decreased. On account of the characteristics of POE, the melt strength change of PP/nano-CaCO 3 blend system after POE’s addition was studied. The melt strength of the blend system decreased at first and then increased. It can be found that POE distributed uniformly in PP, and POE particle size decreased with the increase of POE content. Besides, it was revealed that POE could improve the cellular structure of the vertical section and the parallel section. The mechanical properties and cellular structure were optimized when 10% POE was added.