With the crude oil becoming heavy and the increase of the blending ratio of blending the residue oil into the FCC feedstock, it becomes difficult to process the feedstock with RFCC unit, while will influence the quality and distribution of the FCC products. In order to raise the FCC process capacity and the yield of light oil, throwing away the slurry from the heavy oil catalytic cracking unit is an effective measure to improve the catalytic cracking operation at present. Slurry is a heavy oil of poor quality, it is difficult to process with the catalytic cracking unit. The slurry is used to blend fuel oil at present, but the economic benebit is low. And the slurry contains considerable amount of hydrocarbon of better cracking per-bormance which is the ideal feedstock for catalytic cracking and while the mass polynuclear aromatics content is the raw material to produce high added value chemical product such as needle coke, plasticizing agent. Therefore reasonable processing and using the slurry is an effective measure to increase raw material source for FCC and to raise enterprise economic benebit. This text has expounded the technology and developments on the sluny purification, hydrotreating, solvent deasphalt-ing, solvent extraction and delayed coking etc for FCC slurry.