Optical fibre Fabry–Perot relative humidity sensor based on HCPCF and chitosan film

An optical fibre Fabry–Perot interferometer (FPI) sensor for relative humidity (RH) measurement is proposed. The FPI is formed by splicing a short section of hollow-core photonic crystal fibre(HCPCF) to single mode fibre and covering a chitosan film at the end of HCPCF. The refractive index of chitosan and film thickness will change with ambient RH, leading to the change in the reflected interference spectrum of FPI. RH response of the FPI sensor is analysed theoretically and demonstrated experimentally. It shows nonlinear response to RH values from 35 to 95%RH. The interference fringe shifts to shorter wavelength as RH increases with a maximum sensitivity of 0.28 nm/%RH at high RH level. And the fringe contrast also decreases as RH increases with an available maximum sensitivity of 0.5 dB/%RH. The sensor shows good stability and fast response time less than 1 min. With its advantages of compact structure, good performance, simple and safe fabrication, the proposed optical fibre FPI sensor has great potential for RH sensing.