材料科学
快离子导体
陶瓷
电解质
复合数
制作
复合材料
化学工程
离子键合
聚合物
陶瓷基复合材料
纳米技术
导电体
固化(化学)
金属
作者
Lin Zeng,Chengshuai Bao,Xianshuang Xin,Haitao Lu,Pan Xiong,Xiaorong Dong,Huan Chen,Jun Hong Jin,B. V. R. Chowdari,Xiangwei Wu,Zhaoyin Wen
标识
DOI:10.1002/adfm.202517736
摘要
Abstract Ultrathin composite solid‐state electrolytes with ultrathin thicknesses and ultra‐low weight exhibit significant prospects for constructing high‐energy‐density solid‐state sodium metal batteries (SSSMBs). However, composite quasi‐solid‐state electrolytes (CSSEs) based on ceramic powder usually show discontinuous ionic transport channels and uneven agglomeration of the powder, which limits their practical performance. In this work, a 3D continuous self‐supporting Na 3.3 Mg 0.15 Zr 1.85 Si 2 PO 12 (NMZSP) ultrathin ceramic skeleton is sintered and further combined with an in situ UV curing process of trihydroxymethylpropyl triacrylate (TMPTA) to achieve an 18 µm‐thick ultrathin NMZSP ceramic skeleton composite quasi‐solid‐state electrolyte (UNSCE). The introduction of a ceramic skeleton effectively prevents ceramic powder agglomeration. Moreover, the synergistic interaction between the ceramic skeleton and the polymer matrix creates an abundant continuous two‐phase interface, which promotes the selective and rapid transportation of Na + . Therefore, UNSCE demonstrates a high Na + transference number (0.76). COMSOL simulations confirm that the 3D ceramic skeleton facilitates uniform current density, reducing dendrite formation risks. The Na | UNSCE | Na 3 V 2 (PO 4 ) 3 cell obtains a capacity retention of 91% after 500 cycles at 1C and a discharge capacity of 83.8 mAh g −1 at 10C. In summary, this work presents a scalable fabrication strategy for high‐performance ultrathin CSSEs based on a non‐inert ceramic skeleton, advancing practical deployment in SSSMBs.
科研通智能强力驱动
Strongly Powered by AbleSci AI