亲爱的研友该休息了!由于当前在线用户较少,发布求助请尽量完整地填写文献信息,科研通机器人24小时在线,伴您度过漫漫科研夜!身体可是革命的本钱,早点休息,好梦!

Microstructure, mechanical and fracture properties of friction stir welded 2195 Al-Li alloy joints

材料科学 断裂韧性 极限抗拉强度 微观结构 复合材料 搅拌摩擦焊 压痕硬度 冶金 断裂力学 断裂(地质) 焊接 合金 粒度
作者
Guangda Sun,Weizhao SUN,Li Zhou,Sanfeng LUO,Zili Zhang,Debo LIU,Huiqiang Wu
出处
期刊:Chinese Journal of Aeronautics [Elsevier BV]
卷期号:37 (1): 345-361 被引量:31
标识
DOI:10.1016/j.cja.2023.10.017
摘要

The 8 mm-thick 2195 Al-Li alloy joints were achieved by Friction Stir Welding (FSW). The microstructural evolution, temperature-dependent mechanical properties, and fracture properties were studied. The T1, δ′/β′ and θ′ precipitates were observed in the Base Metal (BM) and the Heat Affected Zone (HAZ). Most of the precipitates, except for re-precipitated δ′/β′ phases, were dissolved in the Nugget Zone (NZ). The tensile specimens that failed at cryogenic temperatures (–196 °C) had the maximum Ultimate Tensile Strength (UTS), and the fracture surface showed the inter-granular fracture characteristics. Compared to those at room temperature (25 °C), the decreasing tensile properties at high temperature (180 °C) were related to microstructure and strain hardening effects. The NZ presented the optimal fracture toughness, and the Crack Tip Opening Displacement (CTOD) was mutually dominated by microhardness and grain size. Analysis on Fatigue Crack Growth (FCG) rates indicates that the Thermal-Mechanically Affected Zone (TMAZ) exhibited the most superior fatigue resistance performance at stress intensity range below 17 MPa·m1/2 due to compressive residual stress and the crack closure effect. The fatigue fracture surfaces reveal that the crack propagation zone was characterized by the striations and secondary cracks. Also, inter-granular fracture behavior was responsible for the fastest FCG rates in the NZ.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
3秒前
sai完成签到,获得积分0
8秒前
9秒前
酷盖发布了新的文献求助10
12秒前
19秒前
酷盖完成签到,获得积分10
22秒前
28秒前
35秒前
踏实莛发布了新的文献求助10
40秒前
1分钟前
Ophelia完成签到,获得积分10
1分钟前
完美世界的应助被科研通管家采纳,获得10
1分钟前
QQQQQQ完成签到 ,获得积分10
1分钟前
1分钟前
2分钟前
2分钟前
踏实莛发布了新的文献求助10
2分钟前
3分钟前
3分钟前
NinaKhan657发布了新的文献求助30
3分钟前
3分钟前
3分钟前
现代火车发布了新的文献求助10
3分钟前
WEileen完成签到 ,获得积分0
3分钟前
3分钟前
Herrily完成签到,获得积分10
3分钟前
4分钟前
4分钟前
mayberichard完成签到,获得积分10
5分钟前
美好傲蕾完成签到,获得积分10
5分钟前
忘乎所以完成签到,获得积分10
5分钟前
cloudy完成签到,获得积分10
5分钟前
丰富广缘完成签到,获得积分10
5分钟前
愤怒的衬衫完成签到,获得积分10
5分钟前
求求了给篇文献完成签到,获得积分10
5分钟前
mycn完成签到,获得积分10
5分钟前
开朗雅霜完成签到,获得积分10
5分钟前
温暖友易完成签到,获得积分10
5分钟前
yan完成签到,获得积分10
5分钟前
顺利毛豆完成签到,获得积分10
5分钟前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 2000
Handbook of Sport Coaching Research 1000
Orthognathic Surgery - 2 Volume Set 500
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
基于结构调控的功能化水诱导发电材料与器件研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8195167
求助须知:如何正确求助?哪些是违规求助? 9580893
关于积分的说明 21872961
捐赠科研通 7795146
什么是DOI,文献DOI怎么找? 3437967
关于科研通互助平台的介绍 2561259
邀请新用户注册赠送积分活动 2484678