气凝胶
塔菲尔方程
材料科学
石墨烯
双金属片
法拉第效率
复合数
比表面积
化学工程
电化学
分解水
超级电容器
析氧
电极
纳米技术
复合材料
化学
催化作用
有机化学
物理化学
冶金
工程类
金属
光催化
作者
Khadija Chaudhary,Sonia Zulfiqar,H.H. Somaily,Muhammad Aadil,Muhammad Farooq Warsi,Muhammad Shahid
标识
DOI:10.1016/j.electacta.2022.141103
摘要
In this work, multifunctional Ti3C2 [email protected] composite aerogel fabricated with bimetallic NiCo2Se4 (denoted as [email protected]) have been prepared by hydrothermal method with the assistance of wet-chemical approach. 3D spatial arrangement of NCSe microspheres in hierarchical aerogel structure improved the exposed electroactive surface area. High surface to volume ratio and luxuriant 3D porous framework of aerogel enabled fast multi-dimensional ion-phase transport. Ti3C2 [email protected] composite aerogel act as flexible skeleton to facilitate strain release and restrained the pulverization of NCSe during electrochemical tests. As a result, [email protected] exhibited high specific capacity of 352.4 mAh g − 1 at 1 A g − 1 with 99.6% initial coulombic efficiency, and maintained capacity retention rate to 91.5% after 5000 consecutive cycles at 12 A g − 1. In case of electrocatalytic water splitting, [email protected] realized 10 mA cm−2 current at significantly low overpotentials of 78 and 201 mV for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. The value of Tafel slope was as low as 55 mV dec−1 (HER) and 79 mV dec−1 (OER), demonstrating fast kinetics. For both half reactions, no significant decay of current density was observed during 10 h electrolysis test. The synergistic effects stemming from intimate contact among NCSe, MXene and Graphene ultimately boosted the electrochemical activity of [email protected] in comparison to NCSe and [email protected] This study proposes a feasible strategy to design 3D electrode materials with optimal properties for multi-range technological applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI