十溴二苯醚
阻燃剂
氧化锑
三氧化二锑
溴化阻燃剂
材料科学
锑
氧化物
化学工程
复合材料
冶金
工程类
作者
Mingdong Li,Bing Nie,Liting Sun,Chunlei Cao,Jianying Ma
标识
DOI:10.1080/10601325.2025.2472279
摘要
Acrylonitrile-chlorinated polyethylene-styrene (ACS) resin is prepared through graft copolymerization of acrylonitrile (AN), chlorinated polyethylene (CPE) and styrene (St). Incorporation of chlorine atoms in ACS enhances flame retardancy and antistatic properties compared to ABS. Limiting oxygen index (LOI) of ACS only keeps within 20 ∼ 23%, which renders it unsuitable for applications requiring fire and heat resistance. In order to improve flame retardancy of ACS, Sb2O3/DBDPE synergistic flame retardant was used for modification of ACS. The influences of the ratio and content of Sb2O3/DBDPE on flame retardancy, thermal stabilities, and mechanical properties of ACS were inveastigated. Experimental results indicated the flame retardancy of ACS was significantly enhanced with ratio of 2/3 and 10 wt% content of Sb2O3/DBDPE, and flame-retardant ACS achieved V-0 class. Characterization of thermal stabilities indicated introduction of Sb2O3/DBDPE significantly improved carbon yield and thermal stabilities of ACS. Characterization of mechanical properties indicated bad compatibility between flame retardant and matrix resin made it easier to aggregation during preparation of composites, uneven dispersion of flame reatrdant in resin slightly decreased mechanical properties of ACS. The effective synergistic flame retardant of Sb2O3/DBDPE reduced the consumption of flame retardant in modification of polymer, which was beneficial to broaden application scope of ACS.
科研通智能强力驱动
Strongly Powered by AbleSci AI