减速器
瞬态(计算机编程)
传动系
方位(导航)
刚度
控制理论(社会学)
瞬态响应
预加载
减震器
工程类
结构工程
汽车工程
机械工程
计算机科学
扭矩
物理
电气工程
人工智能
控制(管理)
医学
血流动力学
内科学
操作系统
热力学
作者
Dong Liang Guo,Yufa Zhou,Mingmao Hu,Ming Li,Yingxue Li,Zhigang Zhang,Wenyi Rao
标识
DOI:10.1177/09544070231186193
摘要
In this study, the transient dynamic response of an electric vehicle secondary reducer with a multi-bearing cooperative preload was studied. The time-varying mesh stiffness, mesh damping, backlash, axial dynamic stiffness, and axial preload of the system are considered. A novel transient dynamics model was established for the multi-bearing cooperative preloading of the electric vehicle secondary reducer suitable for transient conditions. The accuracy of the built model is verified using a bench test. Subsequently, the transient dynamic response of the reducer system under tip-out working conditions was determined. The optimal preload combination of the bearing was determined using an optimization algorithm. The simulation results show that, under the tip out working condition, increasing the bearing preload can effectively restrain the transient impact of the reducer system, and the optimal bearing preload combination obtained by multi-objective optimization using an optimization algorithm can significantly reduce the transient shock problem of the electric vehicle drivetrain. This study provides theoretical support for suppressing transient shocks in electric vehicle reducer.
科研通智能强力驱动
Strongly Powered by AbleSci AI