材料科学
有限元法
复合材料
碳纤维增强聚合物
光纤布拉格光栅
泄漏(经济)
应变计
失效模式及影响分析
极限抗拉强度
结构工程
钢筋混凝土
波长
光电子学
工程类
宏观经济学
经济
作者
Jiajun Shi,Deao Kong,Chenggao Li,Rui Guo,Guijun Xian,Haibo Liu,Xiaolin Tan
摘要
Abstract Pipelines for water, oil, or gas transportation are prone to cracking damage due to severe service conditions. Carbon fiber reinforced polymer (CFRP) composites have been applied to repair cracked pipelines. In the present paper, fiber Bragg grating (FBG) and Brillouin optical time domain analysis (BOTDA) technology were applied to monitor the circumferential strains of the steel pipes and CFRP confined seamless/cracked steel pipes in hydrostatic testing. The finite element model (FEM), and the mechanical model were used to verify and analyze monitored strains. The results showed that FBG achieved real‐time and high‐precision strain monitoring with an error of less than 9.3%, better than BOTDA (less than 22.0%). Compared with FBG, the strain of FEM showed that the error of seamless pipe is less than 6%, and the error of cracked pipe is less than 15%. FEM strain field analysis revealed the failure mode of the confined cracked pipe in tensile fracture of structural adhesive between CFRP and steel substrate. The debonding was identified by the sudden strain drops (4.3%–26.2%) in the cracked area. The leakage was identified by a sudden drop (53.0%) in the slope significantly and fluctuations from the curve of strain and hydrostatic pressure after failure. Highlights Sensor‐embedded CFRP confined cracked pipes prevent leakage and monitor strain. Multiple FBG sensors are more accurate to monitoring the pipe strain than BOTDA. Debonding of CFRP confined cracked pipes is monitored by the sudden strain drop. Leakage of CFRP confined cracked pipes is detected by strain fluctuations.
科研通智能强力驱动
Strongly Powered by AbleSci AI