材料科学
聚合物
韧性
薄膜
复合材料
极限抗拉强度
断裂韧性
结晶度
化学工程
纳米技术
工程类
作者
Joonhyeong Choi,Wansun Kim,Donguk Kim,Seonha Kim,Junsu Chae,Siyoung Q. Choi,Felix Sunjoo Kim,Taek‐Soo Kim,Bumjoon J. Kim
标识
DOI:10.1021/acs.chemmater.8b05114
摘要
Mechanical properties of conducting polymers are an essential consideration in the design of flexible and stretchable electronics, but the guidelines for the material design having both high mechanical and electrical properties remain limited. Here we provide an important guideline for the design of mechanically robust, electroactive polymer thin films in terms of the molecular weight of the polymers. These studies based on a highly efficient, representative n-type conjugated polymer (P(NDI2OD-T2)) revealed a marked enhancement in mechanical properties across a narrow molecular weight range, highlighting the existence of a critical molecular weight that can be exploited to engineer films that balance processability and mechanical and electronic properties. We found the thin films formed from high molecular weight polymers (i.e., number-average molecular weight ( M n ) ∼ 163 kg mol –1 ) to exhibit superior mechanical compliance and robustness, with a 114-fold enhanced strain at fracture and a 2820-fold enhanced toughness, as compared to those of low molecular weight polymer films ( M n = 15 kg mol –1 ). In particular, we observed a jump in the mechanical properties between the M n = 48 and 103 kg mol - 1, yielding a 26-fold enhanced strain at fracture and a 160-fold enhanced toughness. The significant improvement of tensile properties indicates the presence of a critical molecular weight at which entangled polymer networks start to form, as supported by the analysis of the thermal and crystalline properties, specific viscosity, and microstructure. Our work provides useful guidelines for the design of conjugated polymers with recommendations for the best combinations of mechanical robustness and electrical performance for flexible and stretchable electronics.
科研通智能强力驱动
Strongly Powered by AbleSci AI