材料科学
欧姆接触
光电子学
激光器
二极管
包层(金属加工)
砷化镓
半导体激光器理论
量子阱
薄膜
光学
散射
半导体
图层(电子)
物理
复合材料
纳米技术
冶金
作者
M. Buda,J. Hay,Hark Hoe Tan,Jennifer Wong‐Leung,C. Jagadish
标识
DOI:10.1109/jqe.2003.810270
摘要
Thin p-clad InGaAs ridge waveguide quantum-well lasers having an asymmetric structure design were fabricated. The internal absorption coefficient is as low as 2.5 cm/sup -1/, due to the restricted field extension in the 0.3-μm-thick p-type top AlGaAs cladding layer. Ti-Pt-Au metallization is used outside the ridge to provide adherence on the oxide while Au directly contacts the ridge region. It is shown that the most likely source of loss in these thin p-clad devices is scattering at the rough interface between Au and the p/sup ++/ top GaAs layer, after ohmic contact heat treatment.
科研通智能强力驱动
Strongly Powered by AbleSci AI