锂(药物)
化学工程
电化学
锂离子电池
酰亚胺
法拉第效率
电化学窗口
作者
Toshinori Sugimoto,Yosuke Atsumi,Michiyuki Kono,Manabu Kikuta,Eriko Ishiko,Masaki Yamagata,Masashi Ishikawa
标识
DOI:10.1016/j.jpowsour.2010.01.011
摘要
Abstract An ionic liquid electrolyte containing bis(fluorosulfonyl)imide (FSI) anion without any solvent is applied to a silicon–nickel–carbon (Si–Ni–carbon) composite anode for rechargeable lithium (Li)-ion batteries. The FSI-based ionic liquid electrolyte successfully provides a stable, reversible capacity for the Si–Ni–carbon anode, which is comparable to the performance observed in a typical commercialized solvent-based electrolyte, while a common ionic liquid electrolyte containing bis(trifluoromethanesulfonyl)imide (TFSI) anion without FSI presents no reversible capacity to the anode at all. Ac impedance analysis reveals that the FSI-based electrolyte provides very low interfacial and charge-transfer resistances at the Si-based composite anode, even when compared to the corresponding resistances observed in a typical solvent-based electrolyte. Galvanostatic cycling of the Si-based composite anode in the FSI-based electrolyte with a charge limitation of 800 mAh g −1 is stable and provides a discharge capacity of 790 mAh g −1 at the 50th cycle, corresponding to a cycle efficiency of 98.8%.
科研通智能强力驱动
Strongly Powered by AbleSci AI