黄铜
材料科学
应变率
拉伸试验
张力(地质)
拉伤
极限抗拉强度
复合材料
动张力
表面张力
冶金
热力学
铜
物理
医学
内科学
作者
Adam Lipski,Zbigniew Łis
标识
DOI:10.4028/www.scientific.net/ssp.224.238
摘要
This paper presents results of research on PLC effect in CuZn37 brass. A thermographic camera was applied in the tests for determining surface temperature distributions of the tested specimens during tension. Spatial-temporal diagrams were prepared on the basis of those distributions. The tests were performed at two strain rates. No significant difference in the tension curve course depending on the above rate was found. Significant difference was observedas regards the course of specimen temperature changes. Increased frequency of the permanent strain wave propagating along the specimen centerline was observed together with the increase of the wave propagation speed for the higher strain rate. Simultaneous initiation of two propagating waves in opposite directions was observed in case of the higher strain rate.
科研通智能强力驱动
Strongly Powered by AbleSci AI