硫黄
化学
硫化氢
锌
吸附
无机化学
烟气脱硫
硫化氢
沸石
硫化物
二氧化硫
氢
结构精修
X射线晶体学
硫化锌
甲硫醇
离子
作者
Adeyemi D. Ojaide,Miles Gerald Bradford,Caleb J. Tinsley,Eli M. Stecher,Nicholas G. Harrison,James K. Harper,Stacey J. Smith,Roger G Harrison Doctorate
标识
DOI:10.1021/acs.inorgchem.6c01451
摘要
Hydrogen sulfide (H 2 S) is a toxic and corrosive contaminant in industrial gas streams, and its removal typically relies on single-use adsorbents that generate significant waste. Here, we report a regenerable zinc-modified Linde Type A (LTA) zeolite that captures sulfur from H 2 S at elevated temperature and can be repeatedly cycled without structural degradation. Zinc was incorporated into commercial Ca-LTA beads via ion exchange, yielding Zn-LTA materials that retain high surface area, crystallinity, and pore accessibility. Exposure to H 2 S at 400 °C resulted in rapid sulfur uptake (∼80 mg S g –1 ) with a near 1:1 Zn:S ratio, while heating in air at 600 °C removed ∼80% sulfur within 30 min. Characterization, including X-ray diffraction with Rietveld refinement, shows that Zn remains atomically dispersed as extra-framework Zn 2+ cations rather than forming ZnO. Structural analysis resolves the locations of Ca 2+, Zn 2+, and sulfur within LTA: Zn preferentially occupies six-membered ring faces and α- and β-cages, while sulfur binds near Zn within these cages. Upon regeneration, Zn retains its coordination environment, while ∼20% of sulfur remains associated with framework oxygen. These results establish Zn-LTA as a regenerable adsorbent–catalyst and provide structural insight into metal–zeolite interactions governing reversible sulfur capture.
科研通智能强力驱动
Strongly Powered by AbleSci AI