材料科学
光纤
光学
联轴节(管道)
纤维
声学
信号处理
光纤传感器
光电子学
光纤激光器
作者
Mengmeng Wang,Haoting Liu,Qing Li
标识
DOI:10.1109/asta69491.2026.11773830
摘要
Intensified Complementary Metal Oxide Semiconductor (ICMOS) cameras are widely used in low-light imaging, high-energy radiation detection, and other weak-light signal detection applications. In complex human factors engineering scenarios, the imaging uniformity of ICMOS camera directly affects measurement precision and accuracy. The Fiber Optic Taper (FOT)-CMOS coupling system is the core component of ICMOS cameras and is one of the key factors affecting the imaging uniformity of the camera. In this paper, an imaging simulation model of FOT-CMOS coupling system is established based on geometric optics and the Monte Carlo path tracing algorithm. The light propagation process inside the FOT is physically simulated, and the influence mechanism of the taper ratio on imaging uniformity is systematically analyzed. Simulation results indicate that as the taper ratio increases, the overall light transmission efficiency of system decreases, and the structural disparity between edge and central fibers is amplified, leading to a more dispersed grayscale distribution on the image plane and a significant degradation in uniformity. Further analysis of radial grayscale distribution confirms that this degradation is caused by the increased nonuniformity of the internal fiber structure induced by the change in taper ratio. The proposed method provides simulation-driven support for performance prediction and structural optimization of high-uniformity ICMOS cameras.
科研通智能强力驱动
Strongly Powered by AbleSci AI