材料科学
电解质
化学工程
复合数
电导率
离子电导率
锂(药物)
氧化物
金属
钛酸锂
电极
兴奋剂
离子键合
电化学
动力学
粒径
介电谱
纳米技术
无机化学
作者
Chenyang Long,Fei Liu,Yunsong Ran,Jun Zhao,Hao Wen,Dong Zou,Yuandong Zheng,Jiling Song,Shangyan Zhou
标识
DOI:10.1021/acssuschemeng.6c06630
摘要
Abstract Li1+xAlxTi2–x(PO4)3 (LATP) is an oxide solid electrolyte that is widely recognized as a potential material for solid-state lithium metal batteries (SSLMBs) by virtue of its excellent tolerance to ambient atmosphere and inherent expense advantages. Nevertheless, its applicability is severely constrained by large interfacial impedance and insufficient interfacial stability against lithium metal anodes. In this work, a dual-synergistic strategy integrating microreactor-assisted in situ regulation with rare-earth La doping is developed to construct a high-ionic conductivity Li1+xAlxLayTi2–x–y(PO4)3 (LALTP) solid electrolyte for high-performance quasi-solid composite batteries. Enabled by the precise control of reaction kinetics within the microreactor, the as-synthesized LALTP exhibits a narrower particle size distribution and enhanced crystallinity. Rietveld refinement confirmed the successful substitution of La3+ at Ti sites. At a La doping level of 0.1 mol, appropriate LaPO4 segregated at the grain boundaries, synergistically lowering the interfacial impedance. Furthermore, incorporating LALTP into a PVDF polymer matrix markedly improves its mechanical robustness and flexibility. This composite architecture stabilizes the interface with the lithium anode, thereby accelerating Li+ transport kinetics and effectively suppressing lithium dendrite growth. Notably, at a La doping level of 0.1 mol, the electrolyte achieves a high lithium–ion transference number (tLi+ = 0.75) alongside an ionic conductivity of 1.38 mS cm–1, substantially surpassing conventional counterparts. The assembled half-cell delivers a high discharge capacity of 153 mAh g–1 at 1C and maintains 93% capacity retention after 2000 cycles, and delivers 142 mAh g–1 at a high LFP areal loading of 4 mg cm–2, retaining 96.65 % capacity after 200 cycles. Even at a high rate of 5C, the average capacity decay rate remains as low as 0.0071%. In addition, the symmetric cell demonstrates stable cycling over 1000 h at a current density of 0.2 mA cm–2. Furthermore, density functional theory (DFT) calculations further reveal that La doping enhances the interfacial adsorption energy between PVDF and LALTP (from –0.181 to –0.503 eV) and reduces the Li+ migration barrier from 1.54 to 1.10 eV. Overall, this work provides an effective and sustainable strategy for advancing high-performance SSLMBs.
科研通智能强力驱动
Strongly Powered by AbleSci AI